When we last left the bamboo walnut longbow build, we saw how linseed oil brings wood color to life.Behold, the handle and fades. The limbs are walnut backed with bamboo. The too-thick yellow chunk is yellowheart. And the stripey stuff is aptly named zebrawood, AKA zebrano. If I were to build exactly this bow again, I’d make the yellowheart layer no thicker than the bamboo. I’d also do something truly crazy: extend the handle woods into the fades.
Previous stages in this build: Part 1, Part 2, Part 3
After the linseed oil bath, another color treatment remains. This time, the bamboo gets it. A baptism of fire. Very dangerous business…..
Long skinny objects that aren’t fashion models are not easy to photograph, especially in a barn. Here’s the walnut-bamboo flatbow/longbow at the need-to-carve-the-handle phase.
This post continues the walnut-bamboo flatbow type longbow build. Part 1 and Part 2
The handle is glued up and posing for photos. At this point, photography is a form of procrastination, rather than a distracting chore. Because the next step feels really dangerous…..
I use Smooth-On EA 40, a two-part epoxy, for bow body laminations. It’s easy to measure, mix and use. Cost: $35.50 (plus shipping) from 3Rivers Archery. Expensive? No. I’ve done at least 10 glue-ups and have enough for at least three or four more.
It’s glue-up time. Part 1 of this walnut-boo bow build is here.
The two planks dominating the foreground comprise a bow in its embrionic form. You wouldn’t call them embrybows. But I would.
The darker piece is domestic walnut, black walnut. The lighter piece is bamboo. The walnut will be the belly, the bamboo the back. Bamboo makes good back.
Together, they’ll make a 68″ longbow or flatbow. Far as I know, unless you’re talking English longbow, flat and long are more or less swappable. As far as I know.
Now, let’s get to work on this thing.